Definition(s)


Rated Working Pressure

Maximum internal pressure that the equipment is designed to contain and/or control on surface.

Source: API Specification 16A, Specification for Drill-through Equipment, Fourth Edition, April 2017. Global Standards

Rated Working Pressure

The maximum internal pressure that equipment is designed to contain and/or control. Working pressure is not to be confused with test pressure.

Source: API RP 54, Recommended Practice for Occupational Safety for Oil and Gas Well Drilling and Servicing Operations, Third Edition, August 1999 (2007). Global Standards

Source: API RP 74, Recommended Practice for Occupational Safety for Onshore Oil and Gas Production Operation, First Edition, October 2001 (March 2007). Global Standards

 

Rated Working Pressure

Maximum internal pressure that the equipment is designed to contain and/or control.

Source: API STANDARD 16AR, Standard for Repair and Remanufacture of Drill-through Equipment, First Edition, April 2017. Global Standards

Source: API Technical Report 17TR7, Verification and Validation of Subsea Connectors, First Edition, April 2017. Global Standards

Source: API SPEC 6A, Specification for Wellhead and Christmas Tree Equipment, Twentieth Edition, October 2010 (Addendum November 2012). Global Standards

Source: NORSOK D-002, Well intervention equipment, Rev. 2, June 2013. Global Standards

Source:API SPECIFICATION 7K, Drilling and Well Servicing Equipment, Sixth Edition, December 2015. Global Standards

 

Rated working pressure (RWP)

The maximum internal pressure that equipment is designed to contain or control.

  • NOTE 1: Indicative of wellbore wetted rated components or systems.
  • NOTE 2: Rated working pressure should not be confused with test pressure.

Source: API STD 53, Blowout Prevention Equipment Systems for Drilling Wells, Upstream Segment, Fourth Edition, November 2012. Global Standards

 

Rated working pressure

Maximum internal or external pressure that the equipment is designed to contain and/or control.

  • NOTE: The rated working pressure should be defined in terms of applicable loading and environmental conditions.

Source: API TR 1PER15K-1, Protocol for Verification and Validation of High-pressure High-temperature Equipment, First Edition, March 2013. Global Standards

 

Rated working pressure <water mist nozzles>

maximum service pressure at which a hydraulic device is intended to operate.

Source: Resolution A.800(19), Revised Guidelines for Approval of Sprinkler Systems Equivalent to that Referred to in SOLAS Regulation 11-2/12, 23 November 1995, International Maritime Organization, Regulatory guidance

 

Rated working pressure

The maximum internal pressure equipment is designed to contain and/or control. Working pressure is not to be confused with test pressure.

Source API SPEC 16C, Specification for Choke and Kill Systems, First Edition, January 1993 (Reaffirmed 2001). Global Standards

 

Rated working pressure

The maximum internal pressure that equipment is designed to contain or control under normal operating conditions.

Source: API SPEC 16D, Specification for Control Systems for Drilling Well Control Equipment and Control Systems for Diverter Equipment, Upstream Segment, Second Edition, July 2004. Global Standards

 

Rated working pressure

The maximum internal pressure that the equipment is designed to contain and/or control. For an RCD, there is no designated rated working pressure since the maximum internal pressure that the equipment is designed to contain and/or control depends on the operation: dynamic—pipe rotating, stripping—pipe reciprocating or tripped but not rotating and static—no pipe movement.

Source: API SPEC 16RCD, Specification for Drill Through Equipment—Rotating Control Devices, Upstream Segment, First Edition, February 2005. Global Standards

Comments are closed.